PC 6/ 5-GL3U-7,62

https://www.phoenixcontact.com/gb/products/1136013 Printed-circuit board connector - PC 6/ 5-GL3U-7,62 - 1136013 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PCB headers, nominal current: 41 A, rated voltage (III/2): 630 V, nominal cross section: 6 mm², number of positions: 5, pitch: 7.62 mm, color: green, contact surface: Tin, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 2.6 mm Figure shows a 4-pos. version with locking flange at position 3 Your advantages  Increased touch protection in the pin connector pattern for maximum safety even when not plugged in  Intuitive locking mechanism prevents accidental disconnection  Easy PCB replacement thanks to plug-in modules  Well-known mounting principle allows worldwide use Key Commercial Data Packing unit 1 GTIN GTIN 4063151070731 Custom tariff number 85366930 Technical data Item properties Brief article description Printed-circuit board connector Plug-in system POWER COMBICON 6 Type of contact Male connector Range of articles PC 6/..-GLU Pitch 7.62 mm Number of positions 5 Mounting type Wave soldering Pin layout Linear pinning Locking Latch mechanism/latching at position 3 Number of levels 1 08/01/2020   Page 1 / 6 https://www.phoenixcontact.com/gb/products/1136013 Printed-circuit board connector - PC 6/ 5-GL3U-7,62 - 1136013 Technical data Item properties 1 Number of connections 5 Number of potentials 5 Electrical parameters Nominal current 41 A Nom. voltage 630 V Rated voltage 630 V Rated voltage (III/2) 630 V Rated voltage (II/2) 1000 V Rated surge voltage (III/3) 6 kV Rated surge voltage (III/2) 6 kV Rated surge voltage (II/2) 6 kV Material data - contact Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/ JEDEC JESD 201 Contact material Cu alloy Surface characteristics Tin-plated Metal surface contact area (top layer) Tin (2 - 4 µm Sn) Metal surface contact area (middle layer) Nickel (1.3 - 3 µm Ni), Metal surface soldering area (top layer) Tin (2 - 4 µm Sn) Metal surface soldering area (middle layer) Nickel (1.3 - 3 µm Ni) Material data - housing Housing color green (6021) Insulating material PA GF Insulating material group I CTI according to IEC 60112 600 Flammability rating according to UL 94 V0 Dimensions for the product Length [ l ] 28.2 mm Width [ w ] 53.74 mm Height [ h ] 16.1 mm Pitch 7.62 mm Height (without solder pin) 13.5 mm Solder pin [P] 2.6 mm Packaging information Type of packaging packed in cardboard Pieces per package 50 Denomination packing units Pcs. 08/01/2020   Page 2 / 6 https://www.phoenixcontact.com/gb/products/1136013 Printed-circuit board connector - PC 6/ 5-GL3U-7,62 - 1136013 Technical data Ambient conditions Ambient temperature (storage/transport) -40 °C ... 70 °C Ambient temperature (assembly) -5 °C ... 100 °C Ambient temperature (operation) -40 °C ... 100 °C (dependent on the derating curve) Air clearances and creepage distances Clearances and creepage distances IEC 60664-1:2007-04 Specification IEC 60664-1:2007-04 Minimum clearance - inhomogeneous field (III/3) 5.5 mm Minimum clearance - inhomogeneous field (III/2) 5.5 mm Minimum clearance - inhomogeneous field (II/2) 5.5 mm Minimum creepage distance value (III/3) 8 mm Minimum creepage distance value (III/2) 3.2 mm Minimum creepage distance value (II/2) 5 mm Mechanical tests (A) Test specification IEC 61984 Insertion strength per pos. approx. 11 N Withdraw strength per pos. approx. 10 N Polarization when inserted requirement >20 N Test passed Contact holder in insert requirements >20 N Test passed Durability tests (B) Specification IEC 60512-9-1:2010-03 Contact resistance R1 0.5 mΩ Insertion/withdrawal cycles 25 Contact resistance R2 0.5 mΩ Impulse withstand voltage at sea level 7.3 kV Power-frequency withstand voltage 3.31 kV Insulation resistance, neighboring positions > 4 TΩ Thermal tests (C) Specification IEC 60512-5-1:2002-02 Number of positions 6 Conductor cross section 6 mm² Test current 41 A Upper limiting temperature requirements